wear thin

英 [weə(r) θɪn]

美 [wer θɪn]

网络  逐渐消失; 磨薄; 穿薄

英英释义

verb

• deteriorate through use or stress
  1. The constant friction wore out the cloth
  Synonym:wearwear offwear outwear down

双语例句

• Lubrication behaviors, friction and wear properties of different thin solid films were investigated for the same type of harmonic drive reducer under the same test conditions.
  在同型号的谐波齿轮传动减速器和相同的试验条件下，考察了不同固体润滑薄膜体系的润滑性能和磨损特性；
• Some of Wilson's eccentricities are beginning to wear thin.
  人们逐渐对威尔逊的古怪行为失去了兴趣。
• Analysis of the wear failure of feeder liner at Jinchuan copper-nickle sulfide Fabrication of Poly-Si Thin Films with Columnar Grains Structure Grown on Cu-coated Glass Substrates
  金川镍铜矿提料箕斗衬板的磨损失效分析镀铜玻璃衬底上柱状多晶硅薄膜的制备
• Wear shoes with high thin heels.
  穿细跟的高跟鞋。
• In view of the problem that the wear of flange is increased due to reduction of rail gauge, the tread profile of the identical wheel with the thin wheel flange for repair is designed and tested.
  针对运用中因轨距减小而导致轮缘磨耗加剧的问题，设计并试验了统一型减薄轮缘厚度的修理用车轮踏面外形。
• The friction and wear behaviors of the RE thin films under both macro and micro conditions were investigated systematically. The interrelationship between the friction and wear behaviors and experimental conditions was obtained. The wear mechanism was analyzed.
  系统深入地研究了宏观和微观条件下稀土复合纳米薄膜的摩擦磨损性能，获得了其摩擦磨损性能随试验参数的变化规律及其磨损机理。
• "Wear thick clothing like jeans, particularly during this period," Pansiri said, noting mosquitoes can bite through thin clothing.
  他说：“大家最好穿像牛仔裤那样厚一点的衣服，尤其在这段时间。”他说质地较薄的衣服抗不住蚊子的叮咬。
• The wear resistance and optical properties of TiN thin films prepared by ion beam mixing
  离子束混合形成氮化钛膜的摩擦和光学性能
• The wear mechanism is derived from the thin film of PTFE formed on the contact-surfaces during sliding.
  摩擦机理是源于PTFE在滑动过程中相对于对偶面上的成膜作用。
• The result shows that the wear shape gradually became single and thin furrows from the furrows and boundary flake off in plating condition with the increase of heat treatment temperature under the vibration wear condition, i.e, typical micro-cutting mechanism.
  结果表明，振动磨损条件下的磨损形态随热处理温度的升高，由镀态时的犁沟和界面剥落逐步转变为单一细小的犁沟，即属于典型的微切削机制；